ST7汽车级微控制器

ST7 汽车级微控制器产品选型指南

STMicroelectronics offers a complete and well-established family of automotive microcontrollers based on the ST7 core, an industry-standard 8-bit architecture, extended by STMicroelectronics to improve support for high-level language programming and to provide additional interrupt handling features.

The ST7 microcontroller series has been designed for mid-range applications with or without CAN (controller area network) and/or LIN (local interconnect network) interfaces. All ST7 devices feature an enhanced instruction set and are available with Flash or ROM program memory.

The ST7 family includes a range of devices from 8 pins to 80 pins and from 1 Kbyte to 60 Kbytes, to fit your budget and needs

Features

Memories

• Up to 60 Kbytes of OTP/ROM program memory
• Up to 2 Kbytes of RAM
• On-chip EEPROM (optional), 300 k write/erase cycles
• Readout protection (ROP)/optional write protection (WP) on program memory
• In-Application Programming

Clock, reset and power supply

• Power supply operating range: 3.0 V to 5.5 V
• Maximum external frequency: 16 MHz
• Internal trimmable 8 MHz RC, PLL optional
• Clock security system (CSS)
• Low voltage detector (LVD)
• Up to 5 efficient Power saving modes

Interrupts

• Nested interrupt controller
• 14 interrupt vectors plus NMI and RESET
• Up to 21 external interrupt lines, software programmable
• Top-level interrupt (TLI) pin optional

I/O ports

• Up to 64 fully-programmable I/O lines
• Up to 16 high-current capability I/O lines

Peripherals

• Watchdog timer, window watchdog optional
• Up to 5 timers 16-bit or 8-bit with input capture, output compare, PWM generation, motor control features
• ADC 12 or 10-bit, up to 16 inputs with robust I/Os (low-current coupling)
• SPI, SCI, I²C communication interfaces
• CAN interface (2.0B active or passive), LINSCI ?

Instruction set

• 64 basic instructions
• 17 main addressing modes
• 8 x 8 unsigned multiply instructions

Development tools

• Full hardware/software development package
• In-circuit testing capability

Related information

LIN (local interconnect network) is an automotive sub-bus system based on a serial communications protocol. ST's automotive microcontrollers support the LIN protocol.

CAN (controller area network) networks are now found in widely varying types of automotive systems. The standard CAN network is designed for speeds up to 1?Mbit/s in noisy environments. Its robustness is a result of powerful error management, multimaster architecture and the specification of the physical layer. It is now used extensively in European automotive markets, and is currently growing in the US automotive market.

技术支持与电子电路设计开发资源下载

1. STM8A MCU系列 - 汽车用8-位Flash微控制器(宣传册,PDF)
2. 先进半导体解决方案的门电子. PDF
3. 汽车的32位微控制器 对动力系统应用. PDF
4. 意法半导体应用支持. PDF
5. 参考指南. PDF
6. 32位汽车微控制器底盘和安全应用. PDF
7. 汽车的32位闪存微控制器汽车车身应用. PDF
8. 汽车的32位闪存微控制器为群集应用程序. PDF
9. 周围半导体机顶盒应用. PDF
10. 汽车的8位闪存微控制器. PDF
11. STM8S MCU系列8位微控制器. PDF
12. STM32开发工具. PDF
13. STM32,STR7和STR9开发工具 . PDF
14. 8 ,16和32位微控制器产品和工具选择指南. PDF
15. 电机控制选型指南. PDF