详细说明：

74LVC374A Low Voltage CMOS Octal D-Type Flip-Flop Advenced Performance

The 74LVC374A is an advanced high-speed CMOS OCTAL D-TYPE FLIP FLOP with 3 STATE OUTPUTS NON INVERTING fabricated with sub-micron silicon gate and double-layer metal wiring C2MOS technology.

These 8 bit D-Type latch are controlled by a clock input (CK) and an output enable input (OE).

On the positive transition of the clock, the Q outputs will be set to the logic state that were setup at the D inputs.

While the (OE) input is low, the 8 outputs will be in a normal logic state (high or low logic level) and while high level the outputs will be in a high impedance state.

The Output control does not affect the internal operation of flip flops; that is, the old data can be retained or the new data can be entered even while the outputs are off. Power down protection is provided on all inputs and 0 to 7V can be accepted on inputs with no regard to the supply voltage. This device can be used to interface 5V to 3V.

All inputs and outputs are equipped with protection circuits against static discharge, giving them 2KV ESD immunity and transient excess voltage.

技术特性

• 5V TOLERANT INPUTS
• HIGH SPEED: tPD = 6.8ns (MAX.) at VCC = 3V
• POWER DOWN PROTECTION ON INPUTS AND OUTPUTS
• SYMMETRICAL OUTPUT IMPEDANCE:
  • |IOH| = IOL= 24mA (MIN) at V CC = 3V
• PCI BUS LEVELS GUARANTEED AT 24 mA
• BALANCED PROPAGATION DELAYS:
  • tPLH tPHL
• OPERATING VOLTAGE RANGE:
  • VCC(OPR) = 1.65V to 3.6V (1.2V Data Retention)
• PIN AND FUNCTION COMPATIBLE WITH 74 SERIES 374
• LATCH-UP PERFORMANCE EXCEEDS 500mA (JESD 17)
• ESD PERFORMANCE:
  • HBM > 2000V (MIL STD 883 method 3015);
  • MM > 200V

74LVC374A 订购信息

DATASHEET