产品名称：【供应】EFM SHDSL BIS CCPAM5000详细说明：
Standard Compliance
Protocol
ITU-T G.991.2
Transmission rate up to 5.69 Mbps on 2-wire
Transmission rate up to 11.38 Mbps on 4-wire
Transmission rate up to 22.76 Mbps on 8-wire
Support of Annex A, Annex B, Annex F, and Annex G
Auto load balancing with bonded pairs
support point-to-point configuration
Support ATM over G.SHDSL.bis and G.SHDSL MAC bridging(IEEE 802.3ah and 802.1D)
PPPoE (RFC 2416)
RFC 1483/2684 Bridged encapsulation (routing mode optional)
IP support TCP, RIPv1, RIPv2, UDP, ICMP, ARP
IEEE802.1P Priority Output Queuing
IEEE 802.1Q VLAN
IEEE802.3u Fast Ethernet 100BaseT
MAC Filtering
QoS support VBR-rt, VBR-nrt, CBR and UBR
Support 8 PVCs
NAT/PAT support
DHCP client/server and DHCP relay functionality
VPN pass-through IPSec and L2TP
Support IGMP Snooping
DMZ support
Support Port-based VLAN
Maintenance
Firmware upgradeable via FTP or HTTP
Support Telnet
Support ATM OAM F5 End to End and Segment loopbacks
Statistics on DSL link and data ports
Sys-log
anagement
LED
Password protection
PAP and CHAP support
Remote access management via telnet
SNMPv1, v2c
Firewall Security
Packet Filter
Denial of Service
Stateful Packet Inspection (SPI)
Attack Alert and log
Access Control
Real time log
MIB-II (RFC 1213, RFC 1573)
Web based GUI interface
Command Line Interface (CLI)
LED indicator; power, DSL links, Alarm, Ethernet ports and CO/CPE mode
Hardware Interface
DSL interface: 2/4 wires one RJ-11 jack. 8 wires two RJ-11 jack
Ethernet interface: four RJ-45 jack; 10/100BaseT auto sensing and crossover
AC power adapter (100VAC ~ 240VAC, 50-60Hz)
One craft Interface for local console access (CID)
Dimensions & Weight
Dimensions: 35mm(H)×210mm(W)×193mm(D)
Weight: 914g
Operating Requirements
Operating temperature: 0C to +50C
Operating humidity: 5% to 90% RH non-condensing
欢迎咨询请留下您的联系方式：
VDSL 1（CCPAM100M/S 点
VDSL 2+（CCPAM1010 vd
CCPAM1000 VDSL2+ 100
TDM SHDSL NTU CCPAM2