For the estimated $19 billion smart
lighting market to reach its potential, lamps, luminaires and lighting
controls need more functionality than just on/off. Light-emitting diodes
(LED) are needed as the light source, while the ability to dim, tune
colors, automate, and enable remote control of the lighting system is
expected. With additional wireless connectivity and two-way
communication, lighting can become an efficient and scalable Internet of
Things (IoT) backbone that offers differentiated solutions.
As
lighting becomes part of larger and larger networks, differentiation
beyond energy reduction becomes possible. An enhanced user experience
during installation, commissioning, and reconfiguration is possible with
a front-end using Bluetooth found on most mobile devices. Improved zone
control, far field voice monitoring, and beaconing is made possible by
using new and existing lighting infrastructure.
The solid-state
lighting (SSL) market is going through phases of embedding sensors,
adding connectivity, and becoming part of larger ecosystems. By
increasing the traditional lighting functionality, lamps and luminaires
are no longer immune to cumbersome installation or poorly implemented
connectivity. Wireless connectivity allows lighting infrastructure to
form scalable mesh networks. These networks can be locally controlled by
end-users and monitored by building management systems to optimize use
and energy consumption. Smart lightbulbs today are not measured by their
classic capabilities or how well they light up; they are more often
rated based on software performance and additional usability.
Introduction
In this paper we look at opportunities for differentiation in the intelligent lighting market. Multiprotocol connectivity is one of the pieces that let manufacturers distinguish themselves. Wireless multiprotocol makes it possible to simultaneously combine protocols likeZigbeewithBluetooth® on a single chip through intelligent time-slicing. Used together, a lamp can communicate with established Zigbee mesh-enabled devices while providing Bluetooth beaconing and smartphone-enabled light control. Semiconductor solutions for multiprotocol, and developer tools to consider when selecting a platform for designing control and lighting systems are also examined.
Lamps and luminaires (defined as a complete light unit that includes LED light sources and drivers) are up for a major revision. The traditional lamp and light source is becoming an advanced computer system capable of reacting and communicating with its surroundings. Embedding sensors, adding connectivity, and becoming part of larger ecosystems and business analytics are ingredients necessary for full differentiation in the smart lighting market.
On the Path to Smarter Lighting
By incorporating a microcontroller (MCU), a lamp for home can offer different settings without changing any infrastructure. The lamp is programmed to change color from warm red to cool blue in an instant. Philips’ Scene Switch LED lamp cycles through predefined color settings by monitoring how the user flicks the existing light switch. Adding a proximity sensor to the lamp or switch, like Sengled’s SmartSense, turn’s existing fixtures into security or follow-me home lights.
Figure 1: Gartner outlines 5 phases for smart lighting. Many manufacturers are just now starting to add connectivity
In
buildings and retail spaces, high-end luminaires may include
temperature and light sensors that automatically adjust the driver
current. Embedding sensors ensures a consistent color temperature and
perceived light quality can be maintained while extending the LED
lifetime. External or internal light sensors provide a way to perform
daylight harvesting by sampling and measuring the ambient light. The
result is overhead lighting that dim and adjusts dynamically throughout
the day to both preserve energy and provide a consistent experience.
Because
lamps and luminaires are so widely deployed and have access to power,
they appear to be the perfect vehicle to deliver additional
functionality. Residential and consumer benefits range from zonal
automation to simple voice controls. In retail and commercial settings,
location services and personalized beaconing, space utilization,
and sub-metering are potential value-adds. Integration with analytics
and cloud services enable additional professional services, and
represent the final piece of a smart lighting system.
Improving The Function of Lights
Before Solid-state Lighting, the lighting infrastructure had one task; provide light. Today’s emerging smart lighting market makes it possible to introduce new and innovative ways to use lights to collect and act on data.
Adding Bluetooth Beaconing
Bluetooth advertising and beaconingfunctionality provides proximity-awareness, and it’s a popular application in retail, industrial, healthcare, and to some degree also in residential applications. Retailers can use Bluetooth-enabled beacons to provide seamless shopping experiences or navigation aid. Asset tracking, utilization, and automation are also made possible with beacon technology. Unlike RFID, Bluetooth beacons are powered devices that actively broadcast information that can be received by Bluetooth-enabled devices like smartphones. Some of the common frameworks for beaconing include Apple’s iBeacon and Google’s Eddystone. With the latestBluetooth 5specification, beacons can broadcast both iBeacon and Eddystone advertisements, making the beacon technology suitable for greater adoption. A challenge for the growing beaconing market is the deployment and management of beacons. The number of beacons needed, where to place them, and the estimated battery life require planning and support. By incorporating beacons into lighting, a greater density of beacons can be deployed. In addition to providing better beacon accuracy, a multipurpose device such as a light fixture with beacon and advertising capability can reduce the overall number of connected devices that must be installed and managed.
A Better Beacon
Knowing the location of each luminaires makes lighting a great host for beaconing applications. Instead of having to install both lights and beacons, a connected lamp or luminaire can serve as the means to deploy a robust Bluetooth beacon infrastructure. A Zigbee mesh network can serve as the connected lighting communications and automation backbone while simultaneously supporting Bluetooth beaconing. Serving both lighting needs in addition to services like asset tracking and improved retail experiences provides a more cost-effective way to improve beacon density. With access to power it is possible to overcome the logistical challenges with management of battery operated beacons in many scenarios compared to deploying separate, dedicated Beacon devices.
Figure 2: Increasing beacon density and location accuracy by incorporating beacons directly into the lighting infrastructure
Providing location services via the lighting infrastructure enables navigation even in complex and large indoor spaces. Airports with Bluetooth beacon enabled luminaires have a unique possibility to provide travelers with real-time traffic notifications, wayfinding and gate-guidance. Dynamic office space utilization and sub-metering services are a few of the benefits in medium and large building management scenarios. Healthcare applications include patient benefits like faster check-in, location aid, and adjustable quality of the light. Smart and human centric lighting enables tailored settings to improve sleep or even pain relief based on the patient. Lamps and luminaires can also report patient activity and position as a safety measure. In-store navigation, support, instructions, tailored offers, and payment reminders are some of the user benefits found in the retail industry. In residential settings, home automation is made possible with a beacon-enhanced mesh network. Bluetooth enabled outdoor lights or smart door locks can trigger scenes in a house by communicating directly with the light system. As a person moves through the house, lamps can perform advanced occupancy automation based on the user's movements.
Advances inmultiprotocolsoftware and hardware provide a cost effective means to add beacon functionality to luminaires using a single radio and SoC. Instead of requiring two dedicated chips, one for Bluetooth and one for mesh connectivity, the same device can be used to implement multiple wireless protocols. This approach can reduce the overall wireless sub-system cost by 40% by using one radio and SoC and also simplify PCB design by eliminating the need to address the possible interference between two radios in a design.
Improving Lighting Setup and Management
Installing and adding new products like lamps or luminaires to an existing lighting network can be time-consuming and potentially costly. For residential applications, the cost normally equals the time the user needs to spend getting their lamp up and running. In most mesh-based networks a lamp needs to join the network securely by pairing the lamp to a control unit. Wireless switches or remotes are typical control units, and a they might have limitations in the number of devices they can control.
In larger systems the dedicated control unit might be supported by a dedicated gateway or hub as the interface for adding new devices. A gateway offers additional ways for commissioning. Normally a user can control the procedure by connecting a computer or mobile device, while the lamp is running on the separate lighting network. Amazon’s latest smart home hub makes it possible to discover and add new devices via voice commands. Like Philips Hue Bridge, Wink Hub, and SmartThings, Amazon’s Echo Plus includes Zigbee support to control and interact with other Zigbee enabled residential devices like doorlocks, lamps and switches.
Accessibility
to the infrastructure and the sheer number of devices makes
commissioning in industrial and commercial settings different than the
home network. External factors like interference from other networks is
also a likely challenge. Installing, adding, moving, and configuring
luminaires in buildings, industrial or commercial settings requires more
resources and planning. Professional setup therefore often involves an
onsite technician that identifies and programs lights into their
respective zones or groups after the lights have been installed.
Security and Setup Time
In addition to lowering the energy consumption compared to conventional illumination solutions, wireless LED lighting solutions have inherit benefits that reduce users investments compared to wired systems. Less lighting control lines and components can reduce the installation cost by 50 percent in larger installations. Wireless lighting solutions also provide commissioning benefits.
By adding Bluetooth LE support to lights in a Zigbee mesh network, luminaire setup experience can be simplified via apps on smartphones or tablets. Bluetooth can also work as a way to enhance security. Lighting manufacturers providing multiprotocol effectively supply their users with an out of band commissioning portal for the lighting mesh network.
Providing Direct Control
By adding Bluetooth connectivity it is possible to extend what and who can control lights. Without involving technicians, individuals can optimize room or office space properties to their needs. With more focus on human centric lighting, being able to adjust settings or scenes can help individuals feel and perform better. The same is possible in smart homes. Without the need to access a gateway, users can add and control lamps simply by using their smartphone’s Bluetooth connection.
If manufacturers provide a properly implemented smartphone application, integrators and installers can easily push settings directly to the light nodes or zones. High-end solutions today provide the possibility of making the new or updated lighting installation compliant to building and energy efficiency regulations like ASHRAE, Title 24, or IECC, directly from the installers mobile device.
Monitoring and Improving System Health
LED lighting is considered very realiable and provides much longer runtimes than the incandescent options. However, there are situations when lamps and luminaires don’t work as expected. With connected lighting, manufacturers can improve warranties by ignoring shelf time, and providing actual runtime guarantees. During manufacturing a multiprotocol solution enables Bluetooth connectivity to be used as an easy way to configure and test the luminaire and the Zigbee mesh network.
Post installation, multiprotocol enabled Bluetooth beacons enable users to check the health and status of the luminaires and the lighting network directly via a smartphone. The application can warn when it’s time for service, replacement or if updates are needed. With 2-way communication built-in, Lighting as a Service, subscription based lighting, becomes a viable option for integrators and customers concerned with larger one-time investments. It also gives manufacturers better insight to the use of their luminaires, which can be used to improve their product portfolios and services.
Enabling Field Updates
With integrated multiprotocol hardware, lighting manufacturers provide improved out of the box commissioning and control benefits. Via over-the-air updates (OTA), new functionality can be enabled or disabled after installation, making stickier and longer term business relationships possible. OTA makes it possible to optimize beacon range by allowing beaconing to be turned on or off. Although new hardware changes are not possible after installation, security issues and general product improvements can be resolved with OTA support in the wireless lighting infrastructure.
Combining Multiple Wireless Standards into Lights
Advances in software and hardware technology enable us to deliver the enhancements in lighting outlined above by using a single SoC and radio using multiprotocol wireless connectivity. Being able to program a chip in production to support Bluetooth low energy, Zigbee, or a proprietary protocol allows luminaire makers to potentially address different markets. This solution also gives manufacturers the possibility to react faster to changes in the market, while designing a future-proof lamp or luminaire portfolio.
Why Choose Multiprotocol Connectivity
Mainstream customers rarely purchase a smart product based on a particular wireless protocol, but manufacturers that fail to provide ease of use and stable connectivity might experience short-lived brand loyalty and device returns. By supporting multiple wireless protocols, lighting manufacturers can benefit not only from a reduced BOM cost but also adding new capabilities such as beaconing and simplifying existing commissioning and control routines (see table).
Table 1: Combining the benefits of Bluetooth and Zigbee makes Multiprotocol suitable for lighting
Running Multiple Protocols on a Single Radio
A multiprotocol approach opens up new use cases, especially when combining Bluetooth low energy with other wireless protocols. Some of the benefits that Bluetooth and Zigbee provide when used separately can be combined to give lighting manufacturers an edge in the lighting market.
The Zigbee
protocol provides mesh network functionality with short payloads and
duty cycles. The protocol is proven and tested, and millions of products
exist in both residential and commercial applications. Zigbee provides
robust performance even with temporary loss of radio. With built-in
capability to handle situations where lamps and luminaires are removed
from the network, Zigbee can automatically re-route signals and ensure
that the network is operative..
Bluetooth requires a more rigid, deterministic timing schedule for fixed connections and reliable beaconing functionality. This makes it possible to combine the two protocols on a multiprotocol SoC. By accepting that each protocol will not have 100 percent access to the SoC resources at all times, Bluetooth will just need to have priority over Zigbee.
Implementing a multiprotocol, single-chip solution involves sharing the hardware and code infrastructure. This requires a real-time OS kernel for sharing of the resources. A radio scheduler provides the correct time-slicing between the protocols, and a radio abstraction layer ensures a consistent radio API for both protocols.The multiprotocol solution must make it easy to integrate value added services. Lighting manufacturers should be aware of the components of multiprotocol, and ensure that they select a professional grade multiprotocol solution for their products.
Adding Functionality in a Cost Effective Manner
We have established that using multiprotocol enables manufacturers to provide more than one protocol – address markets that have adopted solutions from more than one protocol. With only one hardware solution, new lighting devices can become part of a larger ecosystem compared to a single protocol solution. This is good news for both device makers and users.
A single-chip solution reduces BOM cost as much as 40 percent, and optimizes inventory and simplifies logistics. With a unified hardware platform, it is possible to reduce maintenance and test costs and introduce new designs faster. Using only one design, manufacturers can pick the protocol they need. Differentiation is made possible with a single Zigbee solution, a Bluetooth enabled solution, or in combination, an enhanced mesh and beacon solution. Lighting manufacturers that show value through cost-efficient, scalable and futureproof solutions can enter new markets and face fewer investment barriers.
Being first to market comes with many benefits. When adding connectivity to products like LED lamps and luminaires, and components like drivers and control units, sensors and switches, there are a few options that can help shorten the time to product launch. All of them have benefits and challenges manufacturers need to be aware of.
Conclusion
The solid-state lighting market is rapidly changing its value chain. Through several phases, LED-based lighting is transformed into to smarter home and commercial applications. Lighting OEMs need to tackle new service demands like software field updates as well as business intelligence. Manufacturers must deliver additional value by simplifying setup and control, and provide location based services for asset tracking and advertising. A key ingredient enabling this is wireless connectivity. To implement the next level of sustainable and connected lighting, manufacturers need to ensure that they have a robust hardware and software platform as the basis of their lamps and luminaire business. Lighting manufacturers can achive next level of success by combining multiple protocols such as Bluetooth and Zigbee in a cost-effective manner.
Terminology
Advertisement: Generic Bluetooth advertisement capability
Beaconing: Bluetooth advertisement with using Apple’s iBeacon, Google’s EddyStone or other beacon formats
Bluetooth Mesh: A new mesh networking protocol based on Bluetooth with native mobile device support
Bluetooth LE: Bluetooth with low energy functionality with mobile device support
Lamp: Used by the lighting industry for light bulb
LED: Light-emitting diodes. The light source in lamps and luminaire
Light fixture: See Luminaire
Luminaire: A complete electric light unit (including light source, lamp(s), drivers, parts and wiring)
Mesh beaconing: Bluetooth mesh uses dedicated beacon packets for example to advertise a presence of a Bluetooth mesh network
Multiprotocol: Multiprotocol makes it possible to time-slice multiple wireless protocols on a single SoC
OTA: Over-the-air updates makes it possible to add functionality and update the software on the SoC
SoC: System-on-Chip is an integrated circuit with all components needed for wireless communication
SSL: Solid-state Lighting uses LEDs as a light source
Thread: An open, wireless mesh standard that carries IPv6, used in smart home and lighting applications
Zigbee: A proven, open wireless mesh network standard used in smart cities, home, retail, and lighting
